Pakready benefits

Until you've actually experienced the Pakready system for yourself, it really is difficult to imagine just how it can totally revolutionise your complete packaging design process.

To better understand how Pakready will benefit your business, just take a look at some of what we call Pakready's 'killer facts' below.

FROM DESIGN TO FINISH IN 6 MINUTES!

Experience tells us that it takes a designer up to 2 - 3 hours to create a fully working packaging prototype. By comparison, with Pakready the whole process takes less than 6 minutes. What's more, not only do you get a far superior end product, it's on the right stock and in the right finish. There's no peeling, no cracking and no misalignment. And it's done in less time than it takes to make a cup of tea.

BETTER USE OF THE DESIGNER'S TIME, AFTER ALL DESIGNING IS WHAT THEY ARE REALLY GOOD AT AND PAID TO DO

Based on a designer's typical charge-out rate of £80.00 per hour, and it taking around 2 hours to make a packaging prototype, you'd need to charge £160.00 plus materials. By comparison, if Pakready takes just 6 minutes to produce a prototype, the time taken is only £8.00 (plus materials) - just a tenth of the hourly rate. All of which means much better use of a designer's time, more deadlines met and greater profits!

A FINISHED PROTOTYPE FOR £5.00!

Pakready gives you the capability to produce superior prototypes totally in house. The cost of a typical Pakready box from an A2 sheet, in full colour with the right coating finish, is just £5.00 - and completed in 6 minutes.

80 DESIGNS PER DAY - NOT JUST 3 OR 4!

Think about it! If Pakready can produce a finished cut-out prototype in 6 minutes, your designer could now produce up to 80 designs in a single day!

NO MORE SPRAY MOUNTING, SCALPELS OR PLASTERS!

Pakready prints to the right material, in any weight you choose. Plus it precision cuts and scores the job for you, leaving your designer's hands free and all their fingers intact!

NO MISALIGNMENT AND NO CUTTING FORMS REQUIRED!

Because Pakready's cutting table is linked directly to the printed file, there's absolutely no chance of misalignment of folds or graphics. There's also no need for expensive cutting forms just to create a prototype.

NO MORE MISSED DEADLINES AND PUTS YOU IN TOTAL CONTROL OF THE PROCESS

Because Pakready is a total system, you don't need to send anything to a third party - and that means no delays! Plus, because the Pakready process can take less than 6 minutes from start to finish, you can say goodbye to missed deadlines.

NO CONTEST!

No matter how good your designer is at making mock-up prototypes, they just can't compete with Pakready's speed, quality and accuracy

NOTHING'S TOO COMPLICATED!

If your designers can think it, Pakready can print it and cut it. Windows, petal closures, gussets, reverse folds, die cuts, embossing… you name it Pakready achieves them all - perfectly, every time, no matter how complicated, how small and whatever the shape.

CHEAPER THAN ANY DESIGNER AND BETTER USE OF THEIR SKILLS AND TIME!

You could have Pakready installed and producing prototypes for under £100 per week. No designer in their right mind would work for that - but they could be freed-up to design!

SAVES YOU MONEY AND WILL BEGIN TO PAY FOR ITSELF FROM DAY ONE!

For under £100 per week, you really could be producing superior, photo-quality prototypes every 6 minutes for as little as £5.00 each. In terms of time, cost savings and billing out, producing just one prototype per week would see the Pakready system more than pay for itself.

GIVES YOU THE EDGE!

If your competitors are not using Pakready, rest assured - they'll be producing inferior prototypes. All of which means, businesses using Pakready should have a greater chance of winning new business.

SAMPLES IN MINUTES

Because Pakready allows you to print on any board, foil or acetate substrate, you can produce live field test prototypes on the client's chosen substrate at no additional cost. And with each finished prototype only taking 6 minutes, multiple sampling is quick, cost-effective and easy.

PRODUCE AS MANY VARIANTS AND YOU LIKE!

Because Pakready produces perfect results in less than 6 minutes, you are able to create as many variants as you choose - without having to clock watch.

A PERFECT FINISH EVERY TIME!

Pakready gives you the choice of high gloss or satin finishes as part of the print process. This means you can choose the right finish for your prototypes to closely emulate the finished job.

GET UP AND RUNNING IN JUST A FEW HOURS!

From delivery of your Pakready system, you could be up and running in a matter of hours - quicker than it takes a designer to mock-up the average prototype!